Made to your width and dropCustom curtains, delivered Australia-wideOrder samples

How to choose a curtain track

Choose the track to suit the curtain first: S-Fold curtains need an S-Fold track with gliders about 60 mm apart, and pinch pleat curtains hang on a standard runner track. Then decide ceiling or wall fixing, single or double, and make the track 150 to 250 mm wider than the window on each side. We make curtains only and do not sell tracks.

1. Match the track to the curtain

CurtainTrack it needs
S-FoldS-Fold track with corded gliders, about 60 mm apart
Pinch pleatStandard runner track, or a rod with rings

Tracks that fit our S-Fold curtains: the Spotlight Caprice Premium S-Fold track (gliders on a cord, 60 mm apart, our pick) and the Kmart Anko S-Fold track (loose gliders, fine for light sheers on small windows). Any other S-Fold track works if its gliders are about 60 mm apart.

Already have a track? Check it before you order. Buying one? We compared the two in Spotlight vs Kmart S-Fold tracks. Not sure which heading you want? See S-Fold vs pinch pleat.

2. Ceiling or wall fixing

Ceiling fixedcurtain hangsclear of the wallwindowWall fixedbrackettop of track is thestart of your dropwindow

Diagram, not to scale.

A ceiling-fixed track sits flat against the ceiling. There is no gap above the curtain, light cannot spill over the top, and the room looks taller. You need something solid to screw into: a timber joist or batten, or the right plasterboard anchors.

A wall-fixed track sits on brackets above the window. Use it when the ceiling is too high, there is a deep cornice, or there is nothing to fix to. Put it at least 100 mm above the frame so the curtain covers the top of the window. Either way, measure the drop from the underside of the track, as in our measuring guide.

3. Single or double track

windowback track: sheerfront track: blockoutroom side

Diagram, seen from above.

A single track holds one curtain. A double track holds two: a sheer at the back for daytime privacy and a blockout or thermal curtain at the front for night. The front curtain needs room to slide past the back one, so allow for the depth of both when choosing brackets. Many S-Fold tracks come as single or double sets.

4. How long the track should be

150–250 mm150–250 mmglass stays clearstack-backstack-back

Diagram, seen from the room.

Make the track 150 to 250 mm wider than the window frame on each side. When the curtains are open they bunch up at the ends; this bundle is called the stack-back. On a longer track it sits on the wall, not over the glass. As a rule of thumb, stack-back is about a fifth of the track width for S-Fold and a quarter for pinch pleat. The figures are in curtain fullness and stack-back.

5. Manual or motorised

Most tracks are pulled by hand or with a wand. Motorised tracks need a power point near one end and cost much more. If you are fitting one, check the glider spacing before ordering S-Fold curtains and email us the number if it is not about 60 mm.

Once the track is up, order the curtains to its width. Prices are on the price guide: an 1800 mm wide S-Fold sheer pair is $300.

Common questions

Do you sell curtain tracks?

No. We make the curtains only. Our S-Fold curtains fit the Spotlight Caprice Premium S-Fold track and the Kmart S-Fold track; pinch pleat fits a standard runner track.

Ceiling or wall: which is better?

Ceiling fixing makes the room look taller and leaves no gap above the curtain. Wall fixing suits windows with a low ceiling, a cornice in the way or nothing solid in the ceiling to screw into.

How much wider than the window should the track be?

About 150 to 250 mm each side of the frame, so the open curtains stack on the wall instead of over the glass.

Can I use a motorised track?

Often yes, but check the glider spacing first. Our S-Fold curtains are made for about 60 mm. Email us the spacing of your motorised track before you order.